5
BEFORE FIRST USE
When you rst open your box, you may notice some cosmetic scratches
on your machine, particularly in the ball carousel pit at the top of the
machine. This is perfectly normal and part of the manufacturing process.
You may also notice some yellow ball u inside your machine or on the
throwing wheels. This is also normal as each machine is tested with balls
as part of our quality control process (wheels are wiped down afterwards,
but it’s dicult to remove all traces of ball u).
There is also a 3 position master power switch at the bottom of the
control panel which is turned o for transport. This will need to be turned
on to the correct power source before you can power on the machine
(please turn this o after each use). The 3 positions are:
ASSEMBLY
To assemble your machine, rst simply remove it from the box. You can
safely pick up the machine using the handles at the top front and top back.
You should nd this manual, a charger or AC adaptor and a remote control
in the box. If you have ordered an external battery, AC adaptor or fast
O
LEFT
RIGHT
O
Internal Battery
External Battery or AC Adaptor
To Next Page
Loading...