EasyManua.ls Logo

Spinfire Pro 2 - Page 18

Spinfire Pro 2
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Feed On:
Low Battery:
2 Line Drill - narrow mode which will alternate
between hitting you a narrow forehand then a
narrow backhand. If you press it again, you will enter
the 2 Line Drill - medium mode which alternates
between a medium forehand and a medium
backhand (slightly more dicult). Pressing the
button a 3rd time will enter the 2 Line Drill - wide
mode which alternates between a wide forehand
and wide backhand (the most dicult). Press this
button a 4th time to turn o the 2 Line Drill. Note
that the maximum interval setting when using the
2 Line Drill – wide is 17 and medium is 19. You can
also turn on Vertical Random at the same time to
have short and deep balls while using the 2 Line
Drill. The speed, spin and interval can also be varied
as described above.
When this LED is illuminated, the machine is
currently feeding balls (ie, more caution should be
used when standing near the front of the machine).
If no balls are red from the machine for
approximately 25 seconds (can be up to 45
seconds), the feeder will pause as a safety
precaution. This safety feature can be turned o if
required, please search our online support section
for instructions on how to do this.
The low battery light will illuminate when the
battery’s charge is getting low. You will have limited
time left once this illuminates and you should
charge your battery. You also have the 4 bar battery
indicator on the right hand side of the LCD. Note,
the battery should be charged after every use.