16
Horizontal Random:
Random:
2 Line Drill:
such as Horizontal Random or the 2 Line Drill
.
Note, to use this properly, you must set your
machine to re short balls rst (eg, service line),
and then activate Vertical Random
.
Balls will then
randomly re deeper into the court and also at their
original short position. If you try to activate this
setting when balls are already ring deep into the
court, you will nd that the balls will re outside the
baseline.
Once pressed, the machine will move randomly from
side to side in its narrow setting which is quite easy
to begin with. Press this button a second time to
enter the medium setting which provides the same
random feature with more width (making it harder).
It can be pressed a 3rd time to enter the wide
setting which is the hardest. Press this button a 4th
time to cancel the Horizontal Random feature and
the machine will automatically return to the center
position. Once you press this button, a message will
display on the LCD to let you know whether you are
in narrow, medium, wide or off mode. You can also
turn on Vertical Random
at the same time to have
short and deep balls while using Horizontal Random
.
To achieve totally random deliveries of varying
depths and widths, simply activate both the
HORIZONTAL and VERTICAL random buttons one
after the other. It does not matter which order you
choose. For example, press the HORIZONTAL
button and then press the VERTICAL button, so that
both are active. You can also make speed, spin and
interval vary too by pressing VERTICAL while those
menu items are ashing (an “R” will appear next to
their value to conrm it’s activated).
By pressing this button once you will enter the
To Next Page
Loading...