Spinfire Pro 2 - Remote Control Button Functions

To Next Page

To Previous Page

----------------------------------------------------------------------------------------

*The elevation can only be adjusted in increments of

2-5 units, depending on how fast you press the button

(use the control panel if you want ner control).

DOWN

LEFT

RIGHT

RESET

INTERVAL

SPEED

SPIN

HORIZONTAL

VERTICAL

DRILL

Elevation Up*

Elevation Down*

Swivel Left

Swivel Right

Cancels random settings

(horizontal, vertical, 2 line drill & random speed, spin

& interval) and returns the horizontal alignment to

the center.

Increase or decrease the frequency of deliveries

Increase or decrease the speed of deliveries

Increase or decrease the spin level

Horizontal Random

(1 = narrow, 2 = medium, 3 = wide, 4 = o).

You can also turn on vertical random (both will be

turned on) to achieve random depth too.

Vertical Random. This can be active at the same

time as horizontal random or the 2 line drill.

2 Line Drill

(1 = narrow, 2 = medium, 3 = wide, 4 = o).

You can also turn on vertical random (both will be

turned on) to achieve random depth too.