EasyManua.ls Logo

Spinfire Pro 2 - Weather and Electrical Safety; Battery Safety Precautions

Spinfire Pro 2
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
DON’T USE IN
WET WEATHER!
ELECTROCUTION!
BATTERY!
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
The machine should not be used in wet
conditions.
The charger(s) & AC Adaptor are only to be
used indoors.
Always use and store the machine in a dry
environment.
Do not spray with water.
If the battery charger or AC adaptor is wet,
do not pick it up. If the battery charger or AC
adaptor is picked up when wet, a person could be
exposed to hazardous voltages.
Disconnect the machine from any AC adaptor
or battery before making any repairs.
If any power cables are damaged, cease using
them & arrange a replacement.
Connect any charger or AC adaptor to 110
– 250V mains power outlet installed by a
qualied electrical contractor with suitable
protection such as an RCD.
If your machine has an internal or external battery:
Keep sparks and ames away from the battery
(i.e. no smoking).
Keep young children and animals away from
the battery.
Do not use the battery if it has swollen or
expanded.
Do not use the battery if any liquid has
escaped.
Only use a 12V battery with this machine
(approved by your distributor).
When replacing the battery, the terminals
should be wrapped with electrical tape or a
heat shrink sleeve.