EasyManua.ls Logo

Spirax Sarco TVA Series - Pressure and Temperature Limits

Spirax Sarco TVA Series
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IM-P192-02 MI Issue 28
2.4 Pressure / temperature limits
Temperature °C
Pressure bar g
The product should not be used in this region due to the limitations of the software.
PMA
Maximum allowable
pressure @ 239 °C (462 °F)
Saturated steam 32 bar g (464 psi g) otherwise as
the specied ange rating
TMA Maximum allowable temperature 239 °C (462 °F)
Minimum allowable temperature 0 °C (non-freezing) (32 °F non-freezing)
PMO
Maximum
operating
pressure for
saturated
steam service
Horizontal
ow
Superheated
steam
23 bar g @ 239 °C (333 psi g @ 462 °F)
Saturated
steam
32 bar g @ 239 °C (464 psi g @ 462 °F)
Vertical
ow
Saturated
steam only
7 bar g @ 170 °C (101 psi g @ 338 °F)
Minimum operating pressure 0.6 bar g (8.7 psi g)
TMO Maximum operating temperature 239 °C (462 °F)
Minimum operating temperature 0 °C (non-freezing) (32 °F non-freezing)
Maximum electronics ambient temperature 55 °C (131 °F)
Maximum electronics humidity level 90% RH (non-condensing)
PMX
Maximum
differential
pressure
The pressure drop across the TVA owmeter at the maximum
rated ow is nominally 750 m bar (300 inches wg) for the DN50,
and 500 m bar (200 inches wg) for the DN80 and DN100
Cold hydraulic test pressure of: 52 bar g (754 psi g)
Pressure psi g
Temperature °F
*
Steam
saturation
curve

Related product manuals