Key Type Value Description
AsciiComma B .ASC logging enable.
AsciiSpace B .ASP logging enable.
CursorData B .CUR logging enable.
ColumnSumRow B .SUM logging enable.
LoggingMethod L Logging duration.
0 = continuous
1 = frames
2 = time
NumberFrames I Number of frames to log, if LoggingMethod
is frames.
1 to 100000.
Time T Amount of time to log, if LoggingMethod is
time.
0:0:1 to 999:59:59
PassFailFilter L Which frames to log.
0 = all
1 = passed
2 = failed
A.5.1.7 GAI - generate gain frame
This command is equivalent to selecting File | Generate Gain. To read or write the gain frame
data use the RDD or FRM command with the StartFrame parameter set to -1.
:GAI
3
A.5.1.8 REF - set reference
This command is equivalent to File | Set Reference. To read or write the reference frame data
use the RDD or FRM command with the StartFrame parameter set to 0.
:REF
3
A.5.1.9 PRN - set print configuration and print
:PRN <configuration>
1
:PRN?
2
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
223
Key Type Value Description
To Next Page