Spiricon LBA-300 - Page 224

Operator’s Manual LBA-PC
224
1 = circle
Key Type Value Description
Print
3
B start printing now
default = true
BeamImage B Print beam enable.
Results B Print results enable.
SeparatePages B Print beam and results on separate pages.
CurrentOnly B Print current frame only.
StartFrame I First frame to print.
1 to n. ‘n’ is the frame buffer size.
default = current frame.
NumberFrames I Number of frames to print.
0 = all frames
1 to n. ‘n’ is the frame buffer size.
2DdarkBackground B 2D beam print dark background.
A.5.2 Options Menu
A.5.2.1 APT - set aperture configuration
:APT <configuration>
1
:APT?
2
Key Type Value Description
DrawShape L Shape of user drawn aperture.
0 = none
1 = circle
2 = square
3 = ellipse
4 = rectangle
CenterXLoc F x location in world coordinates
5
CenterYLoc F Y location in world coordinates
5
Major F major axis length in world coordinates
5
Minor F minor axis width in world coordinates
5
Rotation I -90 to 90
DisplayShape L Shape of computed display aperture.
0 = none