21
Solo
With the Solo switch () you can monitor the left or right channel of the stereo signal
individually.
In Off position you hear the stereo signal. Set the Solo switch in position L to hear only the left
channel and in position R to hear only the right channel.
With Solo activated you hear the selected channel only on the respective side – this is called “Solo-in-Place”.
However, if you like to hear the selected channel on both sides set the stereo switch to mono. E.g. immediatelly
you experience if the mid and high frequencies are similar.
Phase Ø
With the Phase switch () you invert the phase of the left or the right channel (°).
If the Phonitor is set to mono at the same time you hear only the differences of both chan-
nels. Therefore you are able to precisly evaluate whether signals are placed in the middle. If
the signals are not exactly placed in the middle, you still can hear them.