25
DIP switches
With the DIP switches () on the bottom of the unit the following settings can be chosen:
Level increase of the outputs
By using the DIP switches and you can increase the level of the outputs (XLR and headphone).
DIP switch : ON = The outputs (XLR and headphone) are boosted to + dB.
DIP switch : ON = The outputs (XLR and headphone) are boosted to + dB.
DIP switch and : ON = If both DIP switches and are ON, a boost of + dB is applied.
RCA input HiFi level / Studio level
If you connect a HiFi audio device (e.g. a CD player) to the analog RCA input (), you can amplifiy the signal from
HiFi level to studio level with DIP switch .
The sources are then equal in level when you switch between XLR and RCA (provided that a studio signal is pres-
ent at the XLR input).
DIP switch : ON = The RCA input is boosted from - dBV (HiFi level) to dBu (studio level).
To Next Page
Loading...
