SPL Phonitor 2 - Further DIP Switch Operations; Slave Thru Mode Setup; XLR Output Matrix Activation

26
Slave Thru
By using DIP switches  the chosen input passes directly to the XLR output on the rear.
DIP switch : ON = The chosen input passes directly to the XLR output without being affected by any control,
except Phase inversion). (Slave Thru).
Phonitor Matrix activation for the XLR outputs
With DIP switch  the Phonitor Matrix can be activated for the XLR outputs on the rear. This is useful if you want to
connect a balanced headphone to the XLR outputs.
DIP switch : ON = The Phonitor Matrix is activated for the XLR outputs.