Date of issue: March 2016 Revision 2 Page 34/80
- Pour 1.5 litres of mix into the top tank (fig. 8)
and wait for it to flow into the freezing cylinder.
- Lubricate the two o-ring of the compression
pipe and insert their side into the freezing
cilinder connection hole (fig. 9).
- Rotate the compression pipe counter-clockwise
in order to insert it into the outlet hole of the
pump (fig. 10).
- Position the pump air regulation lever and
adjust it, rotating it in a clockwise direction to
increase the product overrun or counter
clockwise in order to decrease it (fig. 11).
Fig. 8
Fig. 9
Fig. 10
Fig. 11
To Next Page
Loading...
