SPT WA-1010E - Mechanical Control Operation; Mechanical Model Power Control; Setting Mechanical Functions and Fan Speed

1. Power indicator
2, Fan operating indicator
3. Cooling operating indicator
4. Full water indicator
5. Thermostat
6. Speed switch with options for:
LOW FAN, HIGH FAN, LOW
COOL, HIGH COOL
7. Timer (1-8 hours) as well as
ON/OFF switch
WA-IOIOM
Turning ON/OFF
Set TIMER to ON for continuous operation (the unit will operate as long as it is not
turned off). Power indicator comes on.
To turn off the unit, barn the TIMER to the OFF position.
L
SPEE
Setting Function / Ventilation Speed
WA.1010M
Turn the speed switch to select the required setting:
LOW FAN, HIGH FAN, LOW COOL, HIGH COOL,
SPEED OFF
High Cool
Low Cool
High Fan
10