The unit doesn't run or
only runs in fan mode
• Is the machine plugged in?
• Is the mains power supply on?
• Is the room temperature in the working range?
• Is the unit in auto mode? (Electronic Model)
set to cool or heat and set to proper temperature.
The unit seems to do little • Is there direct sunshine?
(Please c!ose the curtains or blinds)
•Are too many windows or doors open?
• Are there too many people in the room?
• Is there something in the room producing lots of
heat?
The unit seems to do nothing
• Is the dust filter dirty?
• Is the air intake or outlet blocked up?
• Is the temperature within the selected tempera_xre +/- 5"F?
• Is the water tar& full? Drain the water.
The room is not coId enough
Too noisy
• The room being cooled should have proper insulation.
If the unit is used in UN-INSULATED
rooms such as Sunrooms, Garages, or Attics, ideal
cooling might not be attained.
-Is the machine positioned unevenly so as to create
vibration?
• Is the floor underneath the machine uneven?
The compressor doesn't run
• The overheat protection feature on the compressor
might be on. If this occurs, wait for the
tempera_zre of the unit to drop.
• Is the water container full? Does it need draining?
NEVER TRY TO REPAIR OR DISMANTLE THE UNIT YOURSELF
REPLACEMENT FILTERS:
To purchase Replacement Filters for this unit, contact SPT usa at
1-800-330-0388 and request model number WA-1010 F & WA-1230F.
If this product is defective or not working properly,
please DO NOT return to your retail store.
Please contact us directly for any Service or Technical Assistance at 1-800330-0388.
14
To Next Page
Loading...
