Need help?Do you have a question about the Spudnik 8060 and is the answer not in the manual?
Details general warranty terms, covered products, and warranty periods.
Outlines steps for obtaining warranty service and service requirements.
Explains symbols used for hazards, applications, settings, and measures.
Specifies requirements for personnel operating or maintaining the machine.
Safety guidelines for hitching, transporting, and operating towed equipment.
Instructions for safe use and installation of the power take-off shaft.
Precautions for working with the machine's electrical and electronic components.
Safety measures for operating and maintaining the high-pressure hydraulic system.
Details the machine's purpose for planting potatoes and chapter overview.
Specifies different row spacing options and adjustments for planter units.
Explains how to adjust seed spacing from 6 to 18 inches for accurate planting.
Covers adjustment of planting depth and covering discs angle/width.
Details idler functions and adjustments for cup belt and high-intensity shakers.
Importance of seed level in bowl and adjustment of feed chain speed.
Table of weights and hopper capacities for 8040, 8060, and 8080 models.
Covers detailed adjustments for feed chains, shakers, seed depth, and sensors.
Diagram and list of parts for CP600 Control Box and MDA Processor.
Explanation of CP600 buttons, their functions, and display interaction.
Details initial, default, and main menu screens and navigation.
Covers Skip Detection, Feed Chain, and Seed Spacing settings.
Guides for Fertilizer Valve Calibration and Distance Measurements.
Instructions for setting up Hydraulic and Fertilizer Hydraulic Drives.
Covers Acre Meter, Information display, and Status/Diagnostics.
Guidelines for CP600 storage, password, and parameter settings.
Safety precautions for maintenance and instructions for cleaning the machine.
Guidelines for storing the machine and performing lubrication.
Maintenance for screwed connections, chassis, tires, and chain drives.
Procedures for maintaining hydraulic and electrical systems.
Detailed parts lists for Main Frame, Hopper, Feed Chains, Row Unit, and Hilling Coulter.
Parts lists for optional shakers, wheels, drives, and cups.
Parts lists for toolbars, cameras, marker arms, radar, and other attachments.
Diagram of hydraulic caster options and associated components.
Schematics for walking beam and steering systems.
Hydraulic diagram for steering axle and return-to-center functions.
Schematics for mechanical and hydraulic shaker feed chain setups.
Diagrams for hydraulic drive and shaker control systems.
Schematic for the dry fertilizer and fill auger system.
Wiring diagram for the electric control terminal and components.
Detailed schematics for various control cable harnesses.
General| Brand | Spudnik |
|---|---|
| Model | 8060 |
| Category | Farm Equipment |
| Language | English |
To Next Page
