Operators manual MODEL 80XX Planter
page 36 of 173
Fertilizer Valve Calibration
AB
7) Select both A and B
buttons to start
calibration.
8) This screen is
calculating the
density
Note: The Density needs to be manually entered from the
weight measurement taken. There is a minimum 2.40 lb and
can not be set lower
Note: Place bucket under one row unit to measure the weight of the
fertilizer. Then multiply by the number of row units.
i.e. If you have a four row planter and measure the fertilizer weight brought
out through the calibration from one row unit, you need to multiply the weight
by four.
CP600 CONTROL BOX
To Next Page
Loading...