Operators manual MODEL 80XX Planter
page 39 of 173
Press the scroll button once
to view the next display
(Continued from the previous page)
Seed Spacing
In case of slippage, different size tires or wheels, etc., the wheel
speed will need to have an offset entered. This display allows you to
change the offset for the tires.
If the radar speed is not reading correctly, it will need to have an offset
entered. This display allows you to change the offset for the radar.
Note: If the difference in the speed of the wheel and the speed of the radar is greater than
20%, then an alarm will be triggered. In the event of this alarm being triggered, the
machine will automatically switch to measure the seed spacing off of the wheel speed until
the error is resolved.
CP600 CONTROL BOX
To Next Page
Loading...
