Operators manual MODEL 80XX Planter
page 65 of 173
Maintenance
Spare parts procurement
Please quote the details on the type plate(s) as well as the machine’s serial no. on every order
for spare parts or accessories, or inquires of a technical nature.
The use of spare parts supplied by third parties Is prohibited. Original spare parts and
accessories approved by the manufacturer are a contribution to safety and guarantee proper
functioning. No liability can be taken for consequences resulting from the use of other parts.
When replacing electrical or hydraulic parts, ensure that only original SPUDNIK spare
parts are used. The use of non-SPUDNIK parts can cause malfunctioning of the machine.
Type plate on machine
Machine serial number
The machine serial no. is punched into
a plate on the frame.
The entire designation has the status of a legal document and may not be removed,
changed or rendered illegible!
Disposing of replaced parts
The following points should be observed before replacing or disposing of parts.
-Replaced parts which still function should be cleaned and stored in n orderly manner.
-Machine parts which cannot be repaired should only be disposed of at appropriate
collecting points or be collected by a scrap metal dealer.
So called “valuable” materials should be deposed of in a proper way, i.e. plastics,
rubber, scrap metal, etc. should be recycled.
Collect and dispose of old oil in accordance with the regulations.
To Next Page
Loading...
