Spypoint FLEX-S - Product Components and Preparation; In the Box; Required Accessories; Components Identification

2
REQUIRED (sold separately)IN THE BOX
• FLEX-S Camera
• Antenna & gasket
• 2 SIM cards preactivated
and inserted (do not remove)
• Installation strap
• Charging cable
• Memory card 2 to 512GB, class 10,
ultra-high speed, new microSD card
• 8 AA Lithium non-rechargeable
recommended (optional) or
LIT-22 Rechargeable lithium
battery pack (optional)
COMPONENTS
ENGLISH
q
Microphone
w
IR LED
e
Light sensor
r
Delay light
t
Photo lens
y
Detection lens
u
Battery level
i
Signal level
o
STATUS light
a
FORMAT button
s
TEST button
d
OFF/ON switch
f
Antenna

Antenna gasket

Antenna O-Ring

12 V jack

Cable lock hole

Locking latch

Slots for installation strap

Screw-thread for standard
¼”-20 tripod mount

Battery door

microSD card slot

Micro SIM card slots

Battery tray

Solar Panel