v1.0
IN THE FIELD
25 ft
(7.5 m)
BEFORE YOU GO TO THE FIELD —
Getting ready, first time use
IN THE BOX
REQUIRED (sold separately)
FLEX
Camera
ANTENNA
INSTALLATION
Strap
2 SIM CARDS
Preactivated and inserted
(do not remove)
MEMORY CARD
2 to 512 GB class 10
ultra-high speed
new microSD card
OR
8 AA
Alkaline or lithium
new batteries
(non-rechargeable)
LIT-22
Rechargeable lithium
battery pack
FLEX
Quick Start guide
Scan for detailed instructions, complete
user manual & other helpful information.
spypoint.com/ex-guide
Need assistance? We can help with
any camera issues. Just contact us!
spypoint.com/support • 1-888-779-7646
#9
Turn your camera
ON & test it.
(Steps 4 & 6)
#8
Install your camera.
Tips
Use: Installation strap
Orientation: North or South
Height: Subject’s mid-body
Lens sight
:
No leaves, branches
or tall grass in front
#7
Turn your camera OFF
until you’re ready to
install it in field.
#6
Press the TEST
button to receive
a photo.
#5
Format your
memory card.
Immediately hold the
format button for 5 s.
FORMAT LED
will turn green.
#4
Turn your
camera ON.
All LEDs will
begin to blink.
#3
Screw in antenna
& insert memory
card, batteries.
Insert the tray
following the arrow
orientation.
#2
Create an account &
activate your camera
by following the on-
screen instructions.
#1
Download the SPYPOINT app.
To Next Page
General
