EasyManua.ls Logo

Spypoint FLEX - Introduction to SPYPOINT FLEX; FLEX Presentation; Contact and Support Information; SPYPOINT Company Overview

Spypoint FLEX
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DISPOSAL
Only use original spare parts and accessories.
If, one day, your camera has been used so intensively that
it has to be replaced, or if you no longer have any use for
it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance
can be obtained from your local waste disposal
company or from your local administrative oces.
Electrical appliances not only contain valuable recyclable raw
materials, but also substances which, if disposed of
improperly, can aect public health and the environment.
Help ensure that valuable raw materials are recycled by
returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment
Directive) symbol represents the obligation.
FREQUENCY
Details available on the FLEX help web page
(spypoint.com/ex-guide)
FCC
Operation is subject to the following two conditions:
1. This device must not cause harmful interference.
2. This device must accept any interference received, includ-
ing interference that may cause undesired operation.
WARRANTY
2-year limited warranty, visit spypoint.com/warranty
for complete details.
This device complies with
part 15 of the FCC rules.
COMPONENTS
q
Microphone
w
IR LED
e
Light sensor
r
Delay light
t
Photo lens
y
Detection lens
u
Battery level
i
Signal level
o
STATUS light
a
FORMAT button
s
TEST button
d
OFF/ON switch
f
Antenna
g
12 V jack
h
Cable lock hole
j
Locking latch
k
Slots for installation strap
l
Screw-thread for standard
¼"-20 tripod mount

Battery door

microSD card slot

Micro SIM card slots

Battery tray
Thank you for choosing SPYPOINT

Other manuals for Spypoint FLEX

Related product manuals