Spypoint FORCE-PRO-S - Page 5

5
FORCE-PRO-SSPYPOINT
SOLAR PANEL
Solar energy sensor for charging the internal lithium battery.
NO GLOW FLASH
Night lighting to obtain black-and-white photos and videos.
RED LED INDICATOR
When the button is in the SETUP position and you’re done adjusting
your settings, the red light at the front of the camera will ash to
conrm a motion detection. When moved to the ON position, the red
light will ash for 30 seconds to allow the user to walk away without
being photographed.
PHOTO LENS
Image sensor.
DETECTION LENS
Enlarges the detection area of the camera’s motion sensor.
CABLE LOCK HOLE
Allows you to install a #CLM-6FT padlock cable to secure the unit
(sold separately).
SLOT FOR INSTALLATION STRAP
Allows the camera to be installed using
the included installation strap.
LOCKABLE DOOR LATCH
Allows you to lock and open the door of the camera.
12 V JACK
Allows you to insert a power cord connected
to an external 12 V source.
SCREWTHREAD FOR STANDARD ¼”20
Allows you to attach a standard tripod from ¼“-20.
LCD SCREEN
Allows the user to access the camera's settings menu.
OK BUTTON
Allows the user to conrm a selection.
SWITCH ON/SETUP/OFF
Allows the user to turn the camera ON and OFF, as well as access
the conguration menu.
NAVIGATION BUTTONS
Buttons to navigate the camera’s menus and set the camera.
SD CARD SLOT
Space to insert the SD card needed to save photos and videos.
BATTERY COMPARTMENT
Space to insert 8 AA batteries.
DOOR
Provides access to the battery compartment, ON/SETUP/OFF switch,
navigation buttons, conguration screen and SD card slot.
Components