SRAM code r 2018 User Manual

32Lever Blade Removal
Pour the fluid from the brake lever body into a pan. Squeeze the lever
blade to force any remaining brake fluid out of the lever body.
Clean the lever.
NOTICE
If the system has been contaminated with mineral oil or DOT 5 fluid,
flush all the parts with soapy water, rinse, and allow all parts to dry prior
to rebuilding. Install all new seals and a new hose.
For best braking performance, use only SRAM® High-Performance DOT
5.1 fluid. If SRAM fluid is not available, use only High-Performance DOT
5.1 fluid or 4 fluid.
Separate the bladder from the reservoir cap.
Clean the reservoir cap.
Remove the binder plug.
Remove the pinch bolt.
Oil Pan Torque Spec 22 mm
5
6
Pick Torque Spec 22 mm
7
T8 Torque Spec 22 mm
8

SRAM code r 2018 Specifications

General

Brand	SRAM
Model	code r 2018
Category	Bicycle Accessories
Language	English