SRAM code r 2018 User Manual

37Lever Blade Installation
Lever Blade Installation
Insert the lever blade bushings into both sides of the lever.
Steps to reassemble the R lever blade assembly:
Place the washer on the cam/push rod assembly. Apply a small amount
of SRAM® DOT grease to hold the washer in place.
Install the lever return spring onto the cam/push rod assembly.
While holding the cam/push rod/lever return spring/washer in place,
install the assembly onto the lever blade and proceed to step 2.
1

SRAM code r 2018 Specifications

General

Type	Hydraulic Disc Brake
Lever Material	Aluminum
Caliper Design	4-Piston
Brake Pad Type	Organic
Adjustment	Reach Adjust
Intended Use	Mountain Biking
Material	Aluminum
Color	Black
Rotor Compatibility	6-bolt, Centerlock
Pad Type	Organic

Summary

SRAM Code Brakes Caliper Service

Caliper Parts, Tools, and Supplies

Lists necessary components, tools, and safety items for caliper service.

Caliper Exploded View

Visual guide showing an exploded view of the brake caliper parts.

Caliper Service Procedures

Step-by-step instructions for brake pad and piston maintenance.

SRAM Code RSC Lever Service

RSC Lever Parts, Tools, and Fluids

Lists components, tools, and fluids required for RSC lever service.

RSC Lever Exploded View

Visual breakdown of the RSC lever components.

RSC Lever Service Procedures

Detailed steps for removing and installing lever blade and piston assembly.

SRAM Code R Lever Service

R Lever Parts, Tools, and Fluids

Lists components, tools, and fluids required for R lever service.

R Lever Exploded View

Visual breakdown of the R lever components.

R Lever Service Procedures

Detailed steps for removing and installing lever blade and piston assembly.