SRAM code rsc 2018 User Manual

18Lever Blade Removal
Use a magnet to remove the detent spring and ball.
Remove the remaining reservoir cap bolt, then remove the reservoir
cap and bladder.
Pour the brake fluid into an oil pan. Squeeze the lever blade to force
any remaining brake fluid out of the lever body.
Separate the bladder from the reservoir cap.
Clean the reservoir cap, then discard the bladder.
4
5
T10 Torque Spec 22 mm
Oil Pan Torque Spec 22 mm
6
7

SRAM code rsc 2018 Specifications

General

Brand	SRAM
Model	code rsc 2018
Category	Bicycle Accessories
Language	English