SRAM code rsc 2018 User Manual

27Lever Blade Installation
Tighten each pivot bolt.
Press a new bladder into the reservoir cap, make sure the bladder is
properly seated into the reservoir cap.
Insert the reservoir cap/bladder assembly onto the lever body.
Install a new detent ball followed by a detent spring into the lever body
reservoir hole closest to the lever blade.
T10 1.1-1.3 Nm (10-12 in-lbs) 22 mm
4
5
6
7

SRAM code rsc 2018 Specifications

General

Brand	SRAM
Model	code rsc 2018
Category	Bicycle Accessories
Language	English