Introduction
The EVLPOWERSTEP01 evaluation board is based on the powerSTEP01 system-in-package implementing a complete stepper
motor driver for high power applications. It is designed to operate with a supply voltage ranging from 10.5 V to 85 V with a
maximum current of 10 Arms.
In combination with the STEVAL-PCC009V2 evaluation board and the SPINFamily evaluation tool, the board provides a
complete and easy to use evaluation environment allowing the user to investigate all the features of powerSTEP01.
With daisy chain configuration support, the board is suitable for evaluation of multimotor applications.
Figure 1. EVLPOWERSTEP01 evaluation board
PowerSTEP01 system-in-package integrating microstepping controller and 10 A
power MOSFETs evaluation board
UM1829
User manual
UM1829 - Rev 2 - March 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
To Next Page
Need help?
General
