ST STM32 Nucleo Application Note

November 2014 DocID026958 Rev 1 1/16
16
AN4594
Application note
Getting started with the STM32 Nucleo and the sensor expansion
board X-NUCLEO-IKS01A1
Introduction
This document describes how to develop a sensor-based application using the STM32
Nucleo platform and the X-NUCLEO-IKS01A1 sensor expansion board, in the STM32Cube
software environment. The sensor expansion board is a multi-sensor board with
temperature, humidity, pressure and motion MEMS measuring sensors.
www.st.com

ST STM32 Nucleo Specifications

General

On-board Debugger	ST-LINK/V2-1
Microcontroller	STM32 Series (varies by model)
Connectivity	USB
Headers	Arduino Uno R3 and ST Morpho
Core	ARM Cortex-M (varies by model)
Operating Voltage	3.3V
Clock Speed	Varies depending on the STM32 MCU
Flash Memory	Varies depending on the STM32 MCU
SRAM	Varies depending on the STM32 MCU
GPIO Pins	Varies depending on the STM32 MCU
ADC Resolution	Varies depending on the STM32 MCU
DAC Resolution	Varies depending on the STM32 MCU
Communication Interfaces	SPI, I2C
Debug Interface	SWD