ST STM32 Nucleo Application Note

AN4594
16/16 DocID026958 Rev 1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2014 STMicroelectronics – All rights reserved

ST STM32 Nucleo Specifications

General

On-board Debugger	ST-LINK/V2-1
Microcontroller	STM32 Series (varies by model)
Connectivity	USB
Headers	Arduino Uno R3 and ST Morpho
Core	ARM Cortex-M (varies by model)
Operating Voltage	3.3V
Clock Speed	Varies depending on the STM32 MCU
Flash Memory	Varies depending on the STM32 MCU
SRAM	Varies depending on the STM32 MCU
GPIO Pins	Varies depending on the STM32 MCU
ADC Resolution	Varies depending on the STM32 MCU
DAC Resolution	Varies depending on the STM32 MCU
Communication Interfaces	SPI, I2C
Debug Interface	SWD