ST STM32C0 Series Programming Manual

The STM32 Cortex-M4 instruction set PM0214
136/262 PM0214 Rev 9
3.8.2 SXT and UXT
Sign extend and Zero extend.
Syntax
op{cond} {Rd,} Rm {, ROR #n}
op{cond} {Rd}, Rm {, ROR #n}
Where:
• op’ is one of:
SXTB Sign extends an 8-bit value to a 32-bit value.
SXTH Sign extends a 16-bit value to a 32-bit value.
SXTB16 Sign extends two 8-bit values to two 16-bit values.
UXTB Zero extends an 8-bit value to a 32-bit value.
UXTH Zero extends a 16-bit value to a 32-bit value.
UXTB16 Zero extends two 8-bit values to two 16-bit values.
• ‘cond’ is an optional condition code (see Conditional execution on page 65)
• ‘Rd’ is the destination register.
• ‘Rm’ is the register holding the value to extend.
• ‘ROR #n’ is one of:
ROR #8 Value from Rm is rotated right 8 bits.
ROR #16 Value from Rm is rotated right 16 bits.
ROR #24 Value from Rm is rotated right 24 bits.
If ROR #n is omitted, no rotation is performed.
Operation
These instructions do the following:
1. Rotate the value from Rm right by 0, 8, 16 or 24 bits.
2. Extract bits from the resulting value:
SXTB extracts bits[7:0] and sign extends to 32 bits.
UXTB extracts bits[7:0] and zero extends to 32 bits.
SXTH extracts bits[15:0] and sign extends to 32 bits.
UXTH extracts bits[15:0] and zero extends to 32 bits.
SXTB16 extracts bits[7:0] and sign extends to 16 bits,
and extracts bits [23:16] and sign extends to 16 bits.
UXTB16 extracts bits[7:0] and zero extends to 16 bits,
and extracts bits [23:16] and zero extends to 16 bits.
Restrictions
Do not use SP and do not use PC.
Condition flags
These instructions do not affect the flags.

ST STM32C0 Series Specifications

General

Brand	ST
Model	STM32C0 Series
Category	Computer Hardware
Language	English