ST STM32H735G-DK

6.5 Reset sources
The general reset of the STM32H735G-DK board is active LOW. The reset sources include:
• B1 Reset button
• Embedded STLINK-V3E
• ARDUINO
®
Uno shield board through CN5 connector (pin 3)
• STDC14 receiver
• TAG connector
The general reset is connected to following Peripheral reset function:
• Octo-SPI Flash memory reset
• LCD reset (Option not connected by default)
•
HyperRAM
™
memory
• Ethernet
UM2679
Reset sources
UM2679 - Rev 1
page 15/42