Stack-On PWS-1855-E - SHELVES; Installing Shelves; MAINTENANCE AND ADJUSTMENTS; Door Alignment Procedure

40800-1803
5
14
MAINTENANCE
IMPORTANT
Keep keys and your combinaon number in a
secure place, away from children. Keep this
record of your serial number and combinaon in
a secure place separate from your safe. To order
a replacement key set, follow the instrucons on
the aached form.
SHELVES
Aach the shelves at the desired locaon with
4 screws as shown.
SCREWS
SHELF
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
© 2018
STACK-ON PRODUCTS
If the door of the safe starts to rub on the door
frame, open the door per the instrucons.
Loosen phillips screw on the side of the top and
boom hinges to release the set screw
as shown below.
Use an Allen Wrench to ghten or loosen the
set screws located on each door hinge.
Realign the door vercally as necessary
as shown below.
Tighten phillips screws to secure set screws.
DO NOT OVERTIGHTEN
Tools Required:
Phillips screwdriver
5mm Allen wrench
SET SCREW
DOOR
PHILLIPS
SCREW