Stahl SHR 6 - Crane test

BASH_02_1.FM
6 Inspection and maintenance
47
6.10Crane test
SLE21 / SMC21
1. Carefully remove front cover of SLE21 / SMC21.
2. The cut-off point is increased by pressing button (S5) permitting the test load of
125% to be lifted.
The device automatically returns to the original cut-off point after 45 minutes.
II IIII pw rerr
Button (S5) pressed.
Cut-off threshhold is raised.
Safety note:
Extremely heavy loads can be lifted.
Risk of accident!
10.08