Stahl SHR 6 - Lubricants; Lubricants for Travel Drive

BASH_02_1.FM
8 Technical data
64
8.6 Lubricants
8.7 Lubricants for travel drive
See operating instructions of travel drive
W0572a
c c c
F0450a
c
SH 30
SH 40
SH 50
SH 60
SHR 60
SH 30
SH 40
SH 50
SH 60
* Oil filling/oil drainage screw
Depending on installation position of gear, the
filling screw is "at the top" and the drainage
screw "at the bottom".
Position of
lubrication point
Type of
lubricant
Designation Quantity of
lubricant
Characteristics, makes
aOil
CLP 460
(PG 220)
SH 30..: 1500 ml
SH 40..: 2000 ml
SH 50..: 6000 ml
SH 60..: 16000 ml
SH 60..: 18000 ml *1
1
1 Viscosity: 460 /s/40°C (220/s/40°C), pour point: -20°C (-40°C)
flash point: +265°C (+320°C), e.g.: Fuchs Renolin CLP 460*, Aral Degol BG 460,
BP Energol GR-XP 460, Esso Spartan EP 460, Mobil Gear 634, Tribol 1100/460,
(Shell Tivela Oil WB)
2 Soap base: Lithium + MoS2, dripping point: approx. 185°C
penetration: 310-340, operating temperature: -20°to +120°C
e.g.: Aralub PMD1*, BP Multi-purpose Grease L21M, Esso Multi-purpose
Grease M, Mobilith SHC 460, Shell Retinax AM, STABYL L-TS 1 Mo
3 Soap base: Synthetic (lithium), dripping point: approx 150°C
penetration: 400-430 (400-430), operating temperature: -20°to +80°C (-35°to
+130°C), e.g.: Aralub FDP00, BP Energrease HT-00 EP, Esso Liquid Gear Grease,
Shell Special, Gear grease H*, Mobilux Liquid grease EP 004,
(Tivela Compound A)
4 Soap base: Lithium + MoS2 (Synthetic + lithium), dripping point: approx. +180°C,
penetration: 355-385 (400-430), operating temperature: -30°to +120°C (-35°to
+130°C), e.g.: Aralub LFZ 0, Renolit FLM 0*, Tribol Molub-Aloy MPG 00, (Tivela
Compound A)
5 Soap base: Lithium, dripping point: approx. +170°C (+260°), penetration: 220-250
(265-290), operating temperature: -20°to +120°C (-40°to + 120°C), e.g.: Aralub
HL3, BP Energrease RBB3, ESSO Roller Bearing Grease Andak C AC 205,
Mobilux 3* (Mobil Mobilgrease 28)
b Grease
GOOF
(GPGOOK)
600 - 2500 g 3
c Grease KPF1K 100 g 2
d Grease
K3K
(KE2N)
500 - 1000 g 5
g
Grease
KPFOK
(GPON)
SH 30..: 100 g
SH 40..:
4
Oil CLP 460
(PG 220)
SH 50..: 2500 ml
SH 60..: 2500 ml
SHR60..: 2500 ml
1
( ) Lubricants for low operating temperatures, -40 ... +40°C)
* Factory filling
*1 SH 60, motor at top
01.08