Stamina Precision Series - Storage and Maintenance; Product Storage Instructions; Regular Maintenance Checks

15
STORAGE
1. To store the AeroPilates® Precision Series Cadillac Studio Tower, simply keep it in a clean dry
place.
2. It is recommended that two people be available to move the AeroPilates® Precision Series Cadillac
Studio Tower. Fold the unit as instructed in the below diagrams, then lift to move.
3. Follow this process as described and illustrated to fold the AeroPilates® Precision Series Cadillac
Studio Tower for easy storage, or moving.
a. Remove the LOCKING KNOBS(31) from the REAR CUSHION FRAME(2).
b. Fold the CUSHION ASSEMBLY(3) upward and secure in folded position by attaching the REAR
CUSHION FRAME(2) to the LOWER UPRIGHTS(7).
The safety and integrity designed into the AeroPilates® Precision Series Cadillac Studio Tower
can only be maintained when the AeroPilates® Precision Series Cadillac Studio Tower is regularly
examined for damage and wear. Special attention should be given to the following:
MAINTENANCE
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Worn or damaged components must be replaced immediately or the AeroPilates® Precision Series
Cadillac Studio Tower removed from service until repair is made.
3. Verify that the CAUTION LABEL(32) is present and legible. Replace the CAUTION LABEL(32) if it is
missing or damaged.
4. Check the HAND/FOOT STRAPS(15) for damage. Replace damaged parts.
5. Check the FOAM GRIP(30). Replace if damaged or worn.
6. Check the CUSHIONS(3) and the EXTENSION CUSHION(5), replace if any of them is damaged or worn.
7. Only Stamina Products supplied components should be used to maintain/repair the AeroPilates®
Precision Series Cadillac Studio Tower.
8. Keep your AeroPilates® Precision Series Cadillac Studio Tower clean by wiping with an absorbent
cloth after use.