Stamina Precision Series - Step 2: Attach Uprights; Step 3: Attach Top Cross Bar

ASSEMBLY INSTRUCTIONS
9
STEP 2
Make the EYEHOOKS(21) point to the front. Insert the UPRIGHTS(9) onto the LOWER UPRIGHTS(7)
and secure with BUTTON HEAD BOLTS(M6x1x15mm)(41) and ARC WASHERS(M6)(45).
STEP 3
Make the EYEHOOKS(21) point to the front. Insert the TOP CROSS BAR(8) onto the UPRIGHTS(9) and
secure with BUTTON HEAD BOLTS(M6x1x15mm)(41) and ARC WASHERS(M6)(45).
Securely tighten all of the bolts from STEP 1 to STEP 3.
Make the Eyehook(21)
point to the front.
Make the Eyehook(21)
point to the front.
FRONT
BACK