Standard C828M - Accessory Parts; Connection of External Speaker

no sound with the amperemeter pointing to zero, then make further adjustment
on the trimmer capacitor till you get proper adjustment.
(b) Adjust the frequency of your party's Station to your Station. In this case,
your party's Station should be provided with a fi ne adjusting circuit for transmit
and receive frequencies. Have him adjust his transmit and receive frequencies
in the same manner.
13. Accessory Parts
The following accessory parts are availabi for C828M
(1) Speaker box, C205K (4 ohms)
(2) AC Power supply,
C12/120-5, 13. 8 V 3A
(3) AC power supply,
C12/120-2, 9-16 V 6.5A
(4} VFO, CVllO
14. Gonnection of Extemal Speaker
If large sound volume is desired, connect external Speaker to SPK terminal on
the rear panel.
Note: Use an external Speaker rated at 4—8 ohms of impedance
— 15 —