Standard C828M - Noise Prevention Measures for Use as Mobile Station

16. Noise PrevetioB Measure for Use as Mobile Station
Precautions for installation of this transceiver in cars and others have been men-
tioned previously. The following measures will be effective for installation in spe-
cific types of cars and motor-boats whose engine may produce excessive noises:
bailery
distributer
ignilion su'iich
ignition
coil
ignilion plug
circuil
breaker
A.C.&E-Anti-noise capacilor
for automobile
B & O-Anii-noise resislor for
automobile
Figure 16-1
The noise prevention capacitors and resistors may be inserted in the places shown
as A, B, C, D and E in Fig. 16-1 above. In some cars, the noise can be preveted
with such insertion at only one place. In some other cars, noise can be decreased
if C828M is powered by car or motor-boat battery directly wired to the transceiver.
— 17 —