1. Machine Specifications
1.1 Printing
Printing Method Fused Filament Fabrication
Max. Print Length(mm) W(max):210, D(max):200, H(max):195
Print Layer Thickness Setting 0.05~0.4mm
Basic Nozzle diameter 0.4mm
Filament width 1.75mm
Printable materials PLA, ABS
Printable color White, Black, Gray, Red, Yellow, Green, Blue
Bed leveling Auto measuring + Manual leveling
1.2 Temperature/Speed
Continuous Nozzle Usage/ Maximum Temperature 250 °C Recommended / 260 °C max
Continuous Bed Usage/ Maximum Temperature 80 °C Recommended / 100 °C max
Recommended printing speed/maximum speed 40mm/s Recommended / 200mm/s max
* Continuous operation at maximum temperature can cause malfunction, Please use in case of nozzle
clogging or other troubles.
1.3 Machine
Power 150W
Dimensions 421 x 433 x 439
Weight 15kg
Port USB, Wifi, Ethernet
Cartridge Auto Load / Unload
1.4 Software/Support
Supported Software STANLEY 3D Slicing Software
Supported File Format *.stl, *.ply, *.obj
Supported Operating System Windows 7 or above, Mac OSX 10.10 or above
Recommended Memory Requirements DRAM 4 GB+
Note
-
Graphics must support OpenGL 2.0 or higher.
1.5 Default Setting of Print layer Width
Nozzle Width 0.4mm
Print Layer Width 0.2mm
To Next Page
Loading...