5
When all settings are done the program returns to the previous screen.
Z OFFSET
After bed leveling, it is highly recommended to check the z-offset.
This Menu allows user to control the GAP in between Nozzle and BED. Standard is 0.25mm and can be customi
zed.
[+] button widens the GAP, [-] button shortens the GAP.
For higher adhesive strength between the print output and the bed, shorten the distance of the z-offset.
For less adhesive strength, widen the distance of the z-offset.
1
From home screen press
[SETTING]
.
To Next Page
Loading...