3. Safety Information
Plug the power cord into a properly grounded outlet which is near and quickly accessible from the machine.
Do not use or place the machine in wet or humid environment.
Caution
Hot Surface
-
The inside of the machine may be hot. To reduce the risk of injury from a hot component,
allow some time to cool down.
(Please be cautious of getting burns during printing as the Nozzle and the heating bed
will maintain a high temperature of over 100 degrees.)
-
Do not put any portion of your body or objects on any part during machine operation as the motor and
bed can be in very high temperature and can cause burns/injuries. Please be cautious.
-
When the power is on, do not let any of your body touch the machine except the bed.
If you have to touch the bed while the power is on, please do so after the bed temperature has been
lowered to room temperature.
-
If you have to touch any parts other than the bed, please do so after the bed and nozzle temperature have been
lowered to room temperature.
Caution
Electric Shock
-
Proceed your work after turning off the machine and unplugging the power cord
from the outlet in case of accessing the system board, or installing hardware or
optional memory devices. If the machine is connected with other device, turn it off and
separate the cables from the machine.
-
This product has been designed, tested and approved to meet strict safety requirements
of international safety standard. Some safety features of parts may not be guaranteed.
Sindoh is not liable for problems caused by using an unauthorized spare parts or consumables.
-
Disconnect the power cord and all the cables connected to the machine to prevent from any electrical shock
when cleaning the outside or inside of the machine.
Caution
Injuries
-
Do not twist, fold, step or place heavy objects on the powercord.
-
Be careful with the power cord peeled off or overloaded.
-
Do not let the power cord pinched by furniture or walls.
-
Misusing the cord could result in fire or electrical shock.
-
Check the cord regularly. When checking the cord, unplug the cord from the outlet first.
-
Please consult a qualified engineer for services or repairs not stated in this User Manual.
To Next Page
Loading...