PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, DO NOT attempt to assemble the
product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): Phillips
screwdriver.
ASSEMBLY INSTRUCTIONS
PREPARATION
Power Unit Assembly
Slide the spray gun holster (K) onto left side, when
facing the unit of power washer unit (A).
Note: When placing the gun with the lance at-
tached, the nozzle will rest in this tray.
1
K
A
Screw x 1
AA
2
A
J
AA
Slip tab into slot and screw the nozzle tray (J) on bot-
tom left, when facing the unit, of power washer unit
(A).
Secure with screw (AA).
Note: DO NOT use a power screwdriver. When the
screw is completely tight, give a small final clockwise
twist of the screwdriver.
DO NOT overtighten.
Hardware Used:
93906_16ARN028_2000_ENG-FR-SP.indd 6 16/12/23 下午1:04
To Next Page
Loading...
