11
SAFETY EDGES
SAFETY EDGESSAFETY EDGES
SAFETY EDGES
The platform lift has two safety edges fitted to protect the user from moving parts of the lift.
Safety edge fitted around the platform floor. If depressed while travel in the up direction,
the lift will stop and only continue when the obstruction is cleared.
Safety edge fitted above the operating panel. If depressed while travel in the up
direction, the lift will stop and only continue when the obstruction is cleared.
Neither edges operate when the lift is travelling in the down direction.
IN THE EVENT OF POWER LOSS TO THE LIFT
IN THE EVENT OF POWER LOSS TO THE LIFTIN THE EVENT OF POWER LOSS TO THE LIFT
IN THE EVENT OF POWER LOSS TO THE LIFT
During power loss, the lift will revert to a battery back up supply fitted on the lift. This
battery will maintain the power to the platform lighting, buttons, digital display and door
locking. If fully charged it will do this for 1 hour.
During power loss, the lift can only travel in the down direction.
In the event of power failure, during use:
Push the lowest floor button and continuously hold it until the lift stops at the lowest
landing.
The door will unlock and the user can exit the lift.
Turn the landing keyswitch to the ‘Lift Off’ position until power is reinstated.
MI D I LI F T G L / S L PL AT F
MI D I LI F T G L / S L PL AT FMI D I LI F T G L / S L PL AT F
MI D I LI F T G L / S L PL AT F O RM L I F T
OR M L I F TOR M L I F T
OR M L I F T
Carriage safety edge
Platform safety edge