28
L I F T C A R E
L I F T C A R EL I FT C A R E
L I F T C A R E
The following lift care procedures carried out regularly will help to keep your lift in good
condition:
Paint finishes and panels should be cleaned with a damp soft cloth and mild detergent.
Ensure that excess water is squeezed out prior to cleaning.
Vinyl skin plate and laminate boards should be cleaned with a soft cloth using a furniture
polish aerosol.
Stainless steel components should be cleaned with a soft cloth, using baby oil or a pro-
priety stainless steel cleaner and then wiped off with a dry, lint-free cloth.
Mirrors should be cleaned with a soft cloth and any glass cleaning fluid.
Flooring should be cleaned with a damp cloth and mild detergent. Ensure that excess
water is squeezed out prior to cleaning.
Never leave objects resting against the doors, door frames or car finishes.
For outdoor installations and coastal high saline environments, servicing frequency re-
mains the same but more frequent monthly routine care must be introduced, this can be
undertaken by the lift owner or service company and includes:
- One full cycle of the lift operation.
- Cleaning of paint work.
- Removal of any debris or leaves.
- Inspection and reporting of any vandalism or misuse which has resulted in damage
to the protective surface.
- Pressure washers should not to be used.
To Next Page
Loading...
