Star Micronics IFBD-HE07X - Page 33

IFBD-HE0708 BE07 User’s Manual
3-24
File Format Rules
 Setting line format is “Item Name”: “Setting Value” The separator (delimiter) is a single-byte English character
“:” (colon)
 OnlyASCIIcharacterscanbeusedinthisle.
 Uploads are rejected for the follwoing.
 •Whenanitemnamethatdoesnotexistisspecied,orthereareinsufcientnumberofsettingitems
• When the setting value input is out of range
 •WhentheinputforStaticvalueandDynamicvaluehasastandardviolationintheIPparametersettingeld.
(See the Notes Field)
 Lines beginning with “#” are skipped as comment lines.
#<< DIPSW Setting >>
# SW1=OFF : DHCP/BOOTP Timeout :ENABLE
# SW2=OFF : Reserved
########################################
# Notes: #
# -When DHCP/BOOTP or RARP is changed #
# to ENABLE, IP Address, Subnet Mask #
# and Gateway Address must be set to #
# 0.0.0.0. #
# -When user password is changed, #
# "********"is displayed. #
# -The range of password length is #
# between 1 and 31. #
# -The range of Web Refresh Time is #
# between 1 and 300. #
# #
# Copyright(C) #
# 2005 Star Micronics co., Ltd. #
########################################
The lines beginning with a # (sharp)
are comment lines.