IFBD-HE0708 BE07 User’s Manual
3-26
Precautions for F/W update compatibility
The following restrictions on F/W update apply to the subject F/W versions.
• When using a product with I/F card F/W that is Ver. 4.X.X or earlier
Upgrade to F/W Ver. 5.0.0 or later is not possible. Use Ver. 4.X.X or earlier F/W.
• When using a product with I/F card F/W that is Ver. 5.0.0 or later
Downgrade to F/W Ver. 4.X.X or earlier is not possible. Use Ver. 5.0.0 or later F/W.
Checking the version of the I/F card that is used
• Turn on the power while pressing and holding the Feed switch on the printer unit and check the self-test print information.
(For details about the contents of self-test print, refer to section 3.2.5 “Self-test Print”.)
• To check the version from the PCB chassis appearance, refer to section 2.1 “Model Names”.
To Next Page
Loading...
