– 11 –
Note:
When using a paper roll with an
57.5 mm width, install the paper roll
holder in the groove in the printer.
If a paper roll with a 57.5 mm
width has been used, a paper roll
with a 79.5 mm width cannot be
used. (Changing from the smaller
roll to a larger roll will cause part
of the print head to rub against
the platen and deteriorate.)
3) Push down both sides of the printer cover
to close.
Note:
Make sure that the printer cover is
securely closed.
4)
Tear Bar Model:
Tear off the paper as shown.
Auto Cutter Model:
If the printer cover is closed after turning
on the power, the cutter operates auto-
matically and the front end of the paper
is cut.
Paper roll holder
Tear Bar Model
To Next Page
Loading...
