– 20 –
4-3. Switch Cover Installation
It is not necessary to install the switch cover. Only install it if it is necessary for you. By in-
stalling the switch cover, the following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch cover as shown in the diagram below.
The power switch can be turned ON (
|
) and OFF (O) by inserting a narrow instrument (ball
pen etc.) in the holes in the switch cover.
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to
use it for long periods. Because of this, you should locate the printer so that the power outlet
it is plugged into is nearby and easy to access.
(2) Push the cover open lever, and open the
printer cover.
(3) Insert the roll paper as shown.
To Next Page
Loading...
