Star Micronics TSP100 - Page 27

– 24 –
2) Non-recoverable errors
Error Description
Head thermistor error
Board thermistor error
VM voltage error
VCC voltage error
EEPROM error
USB error
CPU error
RAM error
POWER Lamp
Flashes at 0.5-second inter-
vals
Flashes at 2-second inter-
vals
Off
Flashes at 1-second inter-
vals
Flashes at 0.25-second
intervals
Flashes at 5-second inter-
vals
Off
Off
ERROR Lamp
Flashes at 0.5-second inter-
vals
Flashes at 2-second inter-
vals
Flashes at 1-second inter-
vals
Flashes at 1-second inter-
vals
Flashes at 0.25-second
intervals
Flashes at 5-second inter-
vals
Off
On
Recovery Conditions
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Note:
1) If a non-recoverable error occurs, turn the power OFF immediately.
2) If a non-recoverable error occurs, please consult the dealer for repairs.
3) Paper cut error
Note:
If the cutter does not return to its home position or does not perform the initial movement,
it will result in a non-recoverable error.
4) Paper detection error
Error Description
Paper cut error
POWER Lamp
Off
ERROR Lamp
Flashes at
0.125-second
interval
s
Recovery Conditions
Recovered by turning the power OFF,
eliminating the cause of the error such as
jammed paper, returning the cutter to its
home position, and turning the power ON
(see 7-3).
Error Description
Paper out error
POWER Lamp
On
ERROR Lamp
Flashes at
0.5-second inter-
vals
Recovery Conditions
Automatically recovered by loading a new
paper roll, then closing the printer cover
.