– 5 –
PARTS REPLACEMENT
5. Printer Mechanism
(1) Turn off the power switch, disconnect the power
cord from the wall outlet.
(2) Remove
• Mechanism shassis unit according to the procedure
described in item 3.
• Three screws 1
• Paper stocker 2
• Screw 3
• NE lever unit 4
• Three screws 5
• Printer mechanism 6
• Mechanism chassis 7
6. Motor Unit
(1) Turn off the power switch, disconnect the power
cord from the wall outlet.
(2) Remove
• Printer mechanism according to the procedure
described in item 5.
• Release the two hooks 1 and remove cutter unit
2 (Auto cutter model only)
• Two screws 3
• Motor unit 4
7
2
1
5
1
1
5
5
6
3
4
2
4
3
1
To Next Page
Loading...
